Peripheral composed by a RFID Reader and an ID Card helps managers to know who is driving a vehicle at a given moment. Inofleet Reports can be obtained both by driver and vehicle. Every time a driver does not identify himself in the beginning of a trip, the Driver ID peripheral issues a warning “beep” sound in order to alert and prevent forgeting to identify himself. Managers can also activate the non identified driver alert.
Connected to the fuel tank cap helps to identify openings in unauthorized locations.
Inhibits the vehicle ignition, until the BAC test, is performed. In case of a negative result the driver can initiate the journey, in case of a positive test the ignition inhibition remains active and an immediate alert is generated.
Fuel level sensor helps monitoring the fuel inside the tank. This way it is possible to detect for each trip the amount of fuel spent, identifying potential anomalous situations.
In case of theft, the vehicle can be immobilized remotely.
The PTO Sensor installation helps Inofleet to register the activation and deactivation of the PTO.
This peripheral helps the fleet manager to monitor the temperature inside the vehicles cargo containers. It’s possible to receive alarms when the values are out of the pre-established limits. An additional option is the monitoring of door openings for validation of the temperatures in the load/unload locations.
This sensor registers events of opening or closing the cargo compartment doors allowing alerts on unauthorized openings.
Through this peripheral the driver indicates one of two possible status, previously setup in Inofleet. Examples: Free– In Service, Occupied – Available; Loaded – Unloaded.